News & Results / SGS bench-scale results
SGS bench-scale resultsPublished

Magnes Reports Outstanding Magnet and Heavy Rare Earth Results from Conventional Ionic Clay Leaching

Further samples planned for ANSTO flowsheet design following SGS bench-scale testwork.

Selected website summary and results. The full official release is available through the source PDF and GlobeNewswire links.

Our ambition is to make Magnes a significant Brazilian source of magnet rare earths. These SGS results give us a concrete reason to advance, with selected material showing an encouraging leach response at ambient temperature. Now we are focused on the next step that matters commercially: producing a concentrate that processors can evaluate. The ANSTO programme and broader SGS testing will help us determine how much we can recover through the full process and where to focus development across Minas Americas.

Cristiano Veloso · Founder and CEO, Magnes

Company-calculated oxide equivalents in primary solution plus both washes, using nominal liquid volumes, per tonne of prepared minus-2 mm laboratory feed. Seven selected geological samples from four holes, plus a separate QC repeat. These are not measured collected-liquid yields, physically produced oxides, commercial recovery or a project-wide average.

Selected samples and a separate QC repeat

Scroll the table horizontally to see all results. With the table focused, you can use the arrow keys.

Company-calculated liquid-stage oxide equivalents in primary solution plus both washes, using nominal liquid volumes.g/t of prepared −2 mm laboratory feed
SampleHoleInterval (m)MREOHREOTREODyTbSEG + HREO
0168MAV_AD_00138–95524155439
0832MAV_AD_006810–112518255811134
1093MAV_AD_01130–13918389513153
1095MAV_AD_01132–340312785221219
1107MAV_AD_01156–79821942,32241409
1108MAV_AD_01157–88921682,07336355
1109MAV_AD_01158–95491121,32424231
1109 · QC repeatMAV_AD_01158–95421111,31923231

Sample origins: MAV_AD_0013, MAV_AD_0068, MAV_AD_0113 and MAV_AD_0115. Published drill-hole reference positions (English) (SIRGAS 2000 / UTM 23S). These are source-field reference positions; displayed precision does not establish independent survey accuracy.

MREO = Nd₂O₃ + Pr₆O₁₁ + Dy₂O₃ + Tb₄O₇

MREO combines neodymium, praseodymium, dysprosium and terbium oxides. TREO includes yttrium and excludes scandium. These are oxide-equivalent mass groups; the source PDF gives the full definitions.

DyTb is included in HREO; HREO is included in SEG + HREO. These groups overlap and must not be added. Schematic grouping, not an area scale.

SEG = samarium, europium and gadolinium oxides. HREO includes yttrium and the Tb–Lu oxides; it excludes europium and gadolinium.

Test method and reporting basis

Approximately 40 g of homogenized prepared minus-2 mm feed was mechanically agitated with 160 mL of 0.5 M ammonium sulphate for 30 minutes at ambient temperature, with pH monitored and adjusted around 4.2, then filtered and washed twice. The source balances use nominal volumes rather than actual collected-liquid volumes; below-detection results are zero-coded, not proof of zero.

Technical qualifications

Source technical qualifications (English)

  • The source release states that its scientific and technical information relating to exploration results was reviewed and approved by geologist Carlos Leite, an independent consultant to Magnes Rare Earths, MAusIMM CP(Geo) 1006695.
  • Seven selected geological samples from four auger holes plus one QC repeat; the repeat is not an eighth geological sample. Selection is not established as statistically representative of the property or wider drilling database.
  • These are company-calculated liquid-stage oxide equivalents, not whole-ore recovery, physically produced oxides, finished-product yield or a project-wide average. SGS balances use nominal volumes rather than actual collected-liquid yields and zero-code below-detection results; below detection does not mean zero.
  • HREO overlaps MREO through Dy and Tb and must not be added to MREO; TREO includes both. Yttrium contributes materially to HREO and is not a magnet rare earth.
  • ANSTO's quotation is signed and acknowledged and samples have been dispatched. Receipt and commencement of ANSTO testing are not established by this source.
  • The planned integrated and wider bench programmes have not established a characterized saleable product, commercial recovery, an optimized flowsheet, mineral resources, reserves or project economics.

Dated source documents

The work ahead

Further samples planned for ANSTO flowsheet design following SGS bench-scale testwork.

Follow the planned resource and processing studies